TS Fail-Safe Electric Actuator
The TS Series Fail-Safe Actuator is a robust positioning device which can store energy imparted from the same motor that drives the output shaft to which a load is connected. Energy is extracted during the power up/homing routine and is stored in the unit's S-Band™ spring band device. The energy is available to position the output shaft to a close or open position upon loss of power or a command to do so.
Power for positioning the load attached to the TS Actuator is generally derived from an electronically controlled motor mounted to the unit and coupled to the device's input shaft. Typically the motor and its electronic drive device are designed to position the load in response to a digital input command to go to one of two pre-programmed positions (open or closed). In the case of a modulating application the output shaft is positioned proportionally between two fixed points (e.g. valve open/valve closed) in response to a 0–10 vdc or 4–20 ma analog signal.
In operation the TS Fail-Safe Actuator combines a conventional planetary gear reducer with Riekor's patented S-Band™ energy storage device. During normal operation the TS acts as a conventional planetary gear reducer with a fixed reduction ratio. The TS Series incorporates a constant torque spring band device which is able to store mechanical energy indefinitely while the electronic positioning motor (through the actuator) positions the valve or damper over its normal operating range. Since the spring force is captured during normal operation it exacts no force or torque on the motor or the unit's internal mechanics while it electronically positions the load. This non-intervention of the S-Band™ device assures efficient operation and low power consumption as well as guaranteeing long life of the actuator.
Upon the loss of power or a command to "return to fail position" (ESD) the TS actuator's output shaft will rotate up to 20 turns to bring the load (valve or damper) to its intended "home" or "safe" position. The TS actuator is factory set to rotate either clockwise or counter-clockwise upon loss of power or go home (ESD) command. In practice, this means that the valve or damper can be set up to go to either fully closed or fully open upon loss of power.
Outdoor Rated — IP66
The TS Fail-Safe Electric Valve Actuator is designed for outdoor applications. The unit is rated IP66 tolerating both high-pressure spray, rain, ice and snow.
Wide Temperature Range
Ambient temperature ranging from -20°C to +65°C is tolerated. An internal heater option is available for colder environments.
Patented S-Band™ Technology
Riekor's patented S-Band™ spring band device stores mechanical energy indefinitely, ensuring reliable fail-safe operation without impacting normal efficiency.
ESD Command Support
Upon loss of power or ESD command, the output shaft rotates up to 20 turns to bring the load to its intended safe position — fully open or fully closed.
TS Fail-Safe Electric Actuator Product Bulletin available upon request. Contact us for specifications and pricing.
Product Bulletin
Download or view the TS Fail-Safe Electric Actuator product bulletin for full specifications.