TB Fail-in-Place Electric Actuator
The TB Series Fail-in-Place Actuator is a robust positioning device designed for accurate and rapid positioning of valves, dampers and other process control equipment. Power for positioning the load is derived from a position-controlled motor mounted to the unit and coupled to the device's input shaft. The motor will position the load (when prompted by a digital input command) to go to one of two pre-programmed positions (open or closed). In the case of a modulating application, the output shaft is positioned proportionally between two established points (e.g. valve open/valve closed) in response to a 0–10 vdc or 4–20 analog signal.
The TB actuator includes a synchronous belt arrangement for increasing the output torque applied to the final drive element. This allows the use of a moderately sized motor to deliver high force or torque. An optional internal 5:1 planetary gear reducer is available to provide further amplification of the torque through the device, allowing even greater output torque to the load.
An optional holding brake can be incorporated which assures that no movement of the load occurs in a high vibration and/or high back-driving force environment.
Fail-in-Place Operation
On loss of power or control signal, the actuator holds its last commanded position — no spring return, no drift — keeping your process stable.
Synchronous Belt Drive
A synchronous belt arrangement increases output torque applied to the final drive element, allowing a moderately sized motor to deliver high force or torque.
Optional 5:1 Planetary Gear Reducer
An optional internal 5:1 planetary gear reducer provides further torque amplification through the device, enabling even greater output torque to the load.
Optional Holding Brake
An optional holding brake assures no movement of the load occurs in high vibration and/or high back-driving force environments.
Digital & Analog Control
Accepts digital input commands for open/closed positioning, or a 0–10 vdc / 4–20 mA analog signal for precise modulating control.
Modulating Applications
Particularly well suited for modulating applications where accurate and rapid response to electronic commands are required.
Product Bulletin
Download or view the TB Fail-in-Place Electric Actuator product bulletin for full specifications.